other
Search
Home Search
  • PDF-1500-X power supply
    PDF-1500-X
    Ø  High AC input (180~264Vac) Ø  High efficiency, long life and high reliability Ø  Built-in active PFC function, PF≥0.95 Ø  Output protection: OVP/OLP/SCP/OTP/Input low-voltage protection/Fan failure protection Ø  Build in DC OK signal Ø  Wide operating ambient temperature (-20℃~70℃) Ø  Altitude up to5000m Ø  100% burn-in test      Ø  3 years warranty MODEL PDF-1500-12 PDF-1500-24 OUTPUT DC Output 12V 24V Rated Current 125A 62.5A Current range 0~125A 0~62.5A Ripple and Noise Note 2 0~70C ≤150mV ≤240mV -20C ≤240mV ≤480mV Voltage ADJ.  Range 10.8~13.2V 21.6~26.4V Voltage Accuracy ±1% Line Regulation ±0.5% Load Regulation ±1% Set-up Time ≤1.5S (220Vac input, Full load) Hold up Time ≥10mS (220Vac input, Full load) Temperature Coefficient ±0.03%/℃ Overshoot and Undershoot <5.0% INPUT Voltage Range   180Vac~264Vac Frequency Range 47Hz--63Hz Power Factor(Typical) PF≥0.95/200VAC       Full Load Efficiency ( Typical) ≥89% ≥90% AC Current (max.) <15 A/220Vac Inrush Current (Typical) <20A@220Vac       Cold start No load power dissipation <60W Leakage Current Input—output: ≤0.25mA     Input—PG: ≤3.5mA  (input 264Vac,63Hz) PROTECTION Input Low-voltage protect point 130~165Vac Recovery point 150~175Vac Output Over Load 135~160A 85A~100A Protection type: shut down, turn off and re-power on Low-voltage 12V: When output voltage≤4.5V, shut down, turn off and re-power on 24V: When output voltage≤10V, shut down, turn off and re-power on Over Voltage Only 12V: 13.6~15.6V, shut down, auto recovery Over Temperature 85~95℃(detect on PFC’s MOS);shut down, auto recovery after the temperature goes down to50℃ Short Circuit Long-term mode, constant current, auto recovery Fan failure detection When any fan failed, shut down, auto recovery ENVIRONMENT Operating amb. Temp. & Hum. -20℃~70℃;  20%~90%RH  No condensing  (refer to derating curve) Storage Temp. & Hum. -20℃~80℃;  10%~95%RH  No condensing SAFETY &EMC    (Note 3) Safety Standards EN60950 Withstand Voltage Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVdc;≤10mA. Isolation Resistance 10M ohms EMI Conduction &Radiation Compliance to EN55022, EN55024, FCC PART 15 CLASS A  Class A Harmonic Current Compliance to EN61000-3-2,Class D EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; OTHERS MTBF (MIL-HDBK-217F) More than 200,000Hrs (25℃, Full load) Dimension  (L*W*H) 278×177.8×63mm DC OK signal 12V:When output voltage≤4.5V, shut down, TTL≤0.4V; when output voltage≥4.5V,working, TTL is 2.5~5.25V 24V: When output voltage≤10V, shut down, TTL≤0.4V; when output voltage≥10V,working, TTL is 2.5~5.25V Packing 2PCS/CTN, 7.0Kgs, 0.04CBM Cooling method Fored air cooling   NOTE 1.All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. 2.Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor. 3.The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies” on https://www.powerld.com. We are Industrial power supply manufacturer with competitive price and good quality,which are widely recognized and trusted by users and can meet social needs.
    A total of

    1

    pages
#

Copyright © 2021 Powerld Enterprises Co.,Ltd.. All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #