Your present location:HomeProductsAC/DC Power SuppliesOpen Frame Single Output / PSF-200 Series switching power supply
  • Product No.: PSF-200 Series

Universal AC input/ Full range

Built-in Active PFC function

Withstand 300Vac surge input for 5 sec.

High efficiency up to 90%(typ)

Output protections: OLP/OVP/SCP/OPP

Wide operating ambient temperature (-20℃~70℃)

All using 105℃ long life electrolytic capacitors.

Free air convection for 150W and 200W with 20.5CFM forced air

100% full load burn-in test

5''*3'' compact size

3 years warranty

 

MODEL

PSF-200-12

PSF-200-24

PSF-200-48

OUTPUT

DC Output

12V

24V

48V

Rated Current

16.7A

8.4A

4.167A

CurrentRange(convection)  

0~12.5A

0~6.25A

0~3.13A

CurrentRange(20.5CFM fan)

0~16.7A

0~8.4A

0~4.167A

Ripple and Noise  Note 2

100mVp-p

150 mVp-p

250 mVp-p

Voltage ADJ.  Range

±10% of rated output voltage

Voltage Accuracy

±1.0%

Line Regulation

±0.5%

Load Regulation

±1.0%

Set-up Time

≤2S (230VAC input, Full load)& ≤4S (115VAC input, Full load)

Hold up Time

≥16mS/150W  10mS/200W 115 / 230VAC IN AT FULL LOAD

Temperature Coefficient

±0.03%/℃

Overshootand Undershoot

<5.0%

INPUT

VoltageRange  

90Vac~264Vac,127Vdc~370Vdc

FrequencyRange

47Hz--63Hz

Power Factor(Typical)

PF0.98/115VAC    PF0.95/230VAC

Efficiency ( Typical)

88.5%

89%

90%

AC Current (max.)

3A

Inrush Current (Typical)

[email protected]   [email protected]   Cold start

Leakage Current

≤3.5mA

PROTECTION

Over Current

105%~150% of rated output current, hiccup mode, auto recovery

Over Power

105%~150% of rated output current, hiccup mode, auto recovery

Over Voltage

125%~150% of rated output voltage, hiccup mode, auto recovery

Over temp.

115+5(detect on Mosfet temperature);shut down, auto recovery after the temperature goes down to 70℃

Short Circuit

Long-term, Auto recovery

ENVIRONMENT

OperatingambTemp& Hum

-20℃~70℃;  20%~90%RH  No condensing

Storage Temp. & Hum.

-40℃~85℃;  10%~95%RH  No condensing

SAFETY &EMC   

Note 3

Safety Standards

UL60950-1; EN60950-12006

Withstand Voltage

Primary-Secondary:3.0KVac;10mA .Primary-PG:1.5KVac;10mA .Secondary-PG:0.5KVDC;≤10mA .

Isolation Resistance

100M ohms

EMI Conduction&Radiation

Compliance to EN55022,EN55024 Class B

Harmonic Current

Compliance to EN61000-3-2,-3

EMSImmunity

Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024,EN61000-6-2 heavy industry level

OTHERS

MTBF (MIL-HDBK-217F)

More than 200,000Hrs (25℃, Full load)

Dimension  (L*W*H)

128×76.5×34.6mm (5''*3'')

Packing

21PCS/CTN, 8.46KGS, 0.015CBM

Cooling method

Cooling by free air convection 

NOTE

1.All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.

2.Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

3. The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies” onhttp://www.powerld.com.cn.