Your present location:HomeProductsAC/DC Power SuppliesEnclosed Single Output / PD-25-S Series Switching Power Supply
  • Product No.: PD-25-S Series

No Load power consumption<0.5W

Universal AC input range

Miniature size,high power density,high efficiency,long life and high reliability

Withstand 300VA surge input for 5 sec.

Output protections:OLP/OVP/SCP

Wide operating ambient temp (-25℃~70℃),100% @50℃、60%@70℃

All using 105℃ long life electrolytic capacitors.

100% full load burn-in test

PCB soldering side with conformal coating

Suitable for critical applications
 

3 years warranty

MODEL

PD-25-S3.3

PD-25-S5

PD-25-S12

PD-25-S15

PD-25-S24

OUTPUT

DC Output

3.3V

5V

12V

15V

24V

Rated Current

5A

5A

2.1A

1.6 A

1.1A

CurrentRange     

0~5A

0~5A

0~2.1A

0~1.6A

0~1.1A

Ripple and Noise 

Note 2

-25~70℃

<50mV

<50mV

<120mV

<120mV

<120mV

Voltage ADJ.  Range

-5%~+10% of rated output voltage

Voltage Accuracy

±2.0%

±2.0%

±1.0%

±1.0%

±1.0%

Line Regulation

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

Load Regulation

±2.0%

±2.0%

±1.0%

±1.0%

±1.0%

Set-up Time

2.0S (115Vac input, Full load); 1.0S (230Vac input, Full load)

Hold up Time

14mS(115Vac input, Full load); 30mS(230Vac input, Full load)

Temperature Coefficient

±0.03%/℃

Overshoot and Undershoot

<5.0%

INPUT

VoltageRange  

90Vac~264Vac127~370Vdc

FrequencyRange

47Hz~63Hz

Efficiency ( Typical)

115Vac input

70%

76%

80%

82%

84%

230Vac input

71%

78%

82%

83%

85%

AC Current (max.)

0.7A

0.7A

0.7A

0.7A

0.7A

Inrush Current (Typical)

<20A@115Vac    <40A@230Vac      Cold start

Leakage Current

Input—output:<0.25mA     Input—PG:<0.75mA

PROTECTION

Over Load

105%~150% of rated output current, hiccup mode,auto recovery

Over Voltage

105%~150% of rated output voltage, Constant Voltage

Short Circuit

Long-term mode, auto recovery

ENVIRONMENT

Operating amb. Temp. & Hum.

-25℃~70℃;  20%~90%RH  No condensing (refer to the derating curve)

Storage Temp. & Hum.

-40℃~85℃;  10%~95%RH  No condensing

SAFETY &EMC

Note 3

Safety Standards

UL60950-1 2nd Ed; IEC 60950-1:2005(2nd Ed) ;EN60950-1:2006

Withstand Voltage

Primary-Secondary:3.0KVac; 10mA .Primary-PG:1.5KVac; 10mA. Secondary-PG:0.5KVDC;10mA.

Isolation Resistance

100M ohms

EMC Emission

Compliance to EN55022,EN55024 ClassB

Harmonic Current

Compliance to EN61000-3-2,-3

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024,EN61000-6-2 heavy industry level

OTHERS

MTBF (MIL-HDBK-217F)

More than 200,000Hrs (25℃, Full load)

Dimension  (L*W*H)

79×51×28.8mm

Packing

48PCS/CTN, 10.4KGS, 0.03CBM

Cooling method

Cooling by free air convection

NOTE

1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.

2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives.

4. Powerld offer accessories for Din-35 rail bar. Please contact sales staff for details.