PD-50

Congratulations to the success of Powerld Web site revision

Product Details

PD-50

n Features:

Ø No Load power consumption<0.5W

Ø Withstand 300VA surge input for 5 sec.

Ø High Efficiency, High reliability and long life

Ø Output protections: OLP/OVP/SCP

Ø Wide operating ambient temperature (-20℃~70℃)

Ø All using 105℃ long life electrolytic capacitors.

Ø 100% full load burn-in test

Ø Terminal block with plastic cover

Ø 3 years warranty

SPECIFICATION

MODEL			PD-50-5	PD-50-12	PD-50-15	PD-50-24	PD-50-48
OUTPUT	DC Output		5V	12V	15V	24V	48V
	Rated Current		8A	4.2A	3.3A	2.2A	1.1A
	Current Range		0~8A	0~4.2A	0~3.3A	0~2.2A	0~1.1A
	Ripple and Noise (-20℃~70℃)Note 2		<80mV	<120mV	<120mV	<200mV	<200 mV
	Voltage ADJ. Range		±10% of rated output voltage
	Voltage Accuracy		±3.0%	±3.0%	±3.0%	±3.0%	±3.0%
	Line Regulation		±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation		±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Set-up Time		＜2.0S (115Vac input, Full load); ＜1.5S (230Vac input, Full load)
	Hold up Time		＞20mS(115Vac input, Full load); ＞50mS(230Vac input, Full load)
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		90Vac~264Vac，127~370Vdc
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)	115Vacinput	79%	84%	85%	86%	88%
		230Vacinput	80%	85%	86%	87%	89%
	AC Current (max.)		<1.3A
	Inrush Current (Typical)		<20A@115Vac <40A@230Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<0.75mA
PROTECTION	Over Load		105%~150% of rated output current, constant power
	Over Voltage		105%~150% of rated output voltage, Constant Voltage
	Short Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		-20℃~70℃; 20%~90%RH No condensing((refer to the derating curve)
	Storage Temp. & Hum.		-40℃~85℃; 10%~95%RH No condensing
SAFETY &EMC Note 3	Safety Standards		UL60950-1; EN60950-1：2006
	Withstand Voltage		Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVDC;≤10mA.
	Isolation Resistance		≥100M ohms
	EMI Conduction&Radiation		Compliance to EN55022(CISPR22) ClassB
	Harmonic Current		Compliance to EN61000-3-2,-3
	EMS Immunity		Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,light industry level,criteriaA
OTHERS	MTBF (MIL-HDBK-217F)		More than 200,000Hrs (25℃, Full load)
	Dimension (LWH)		99×82×38mm
	Packing		40PCS/CTN, 13KGS, 0.043CBM
	Cooling method		Cooling by free air convection
NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. 2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor. 3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives. 4. Powerld offer accessories for Din-35 rail bar. Please contact sales staff for details.