VAT-H200

Congratulations to the success of Powerld Web site revision

Product Details

VAT-H200

n Features:

Ø High AC input

Ø High Efficiency, and High reliability

Ø Output protections: SCP/OVP/OPP/OLP

Ø Wide operating ambient temperature (-40℃~65℃)

Ø All using 105℃ long life electrolytic capacitors.

Ø 100% full load burn-in test

Ø 1 year warranty

SPECIFICATION

MODEL			VAT-H200-5	VAT-H200-12	VAT-H200-24
OUTPUT	DC Output		5V	12V	24V
	Rated Current		40A	16.7A	8.3A
	Current Range Note 1		0-40A	0~16.7A	0~8.3A
	Ripple and Noise Note 2	0~65℃	200mV	120mV	120mV
	Voltage ADJ. Range		±10% of rated output voltage
	Voltage Accuracy		±2.0%	±1.0%	±1.0%
	Line Regulation		±0.5%	±0.5%	±0.5%
	Load Regulation		±2.0%	±1.0%	±1.0%
	Set-up Time		＜2.5S (220Vac input, Full load)
	Hold up Time		＞20mS(220Vac input, Full load)
	Temperature Coefficient		±0.03%/℃
	Overshoot and Undershoot		<5.0%
INPUT	Voltage Range		176Vac~264Vac
	Frequency Range		47Hz~63Hz
	Efficiency ( Typical)		81%(220Vac input)	85%(220Vac input)	87%(220Vac input)
	AC Current (max.)		2.5A
	Inrush Current (Typical)		50A@220Vac Cold start
	Leakage Current		Input—output:<0.25mA Input—PG:<0.5mA
PROTECTION	Over Power		105%~150% of rated output power, auto recovery
	Over Current		105%~150% of rated output current, auto recovery
	Over Voltage		105%~150% of rated output voltage, auto recovery
	Shorted Circuit		Long-term mode, auto recovery
ENVIRONMENT	Operating amb. Temp. & Hum.		-40℃~65℃; 20%~90%RH No condensing
	Storage Temp. & Hum.		-40℃~85℃; 10%~95%RH No condensing
SAFETY &EMC Note 3	Safety Standards		GB4943-2001; EN60950-1：2006
	Withstand Voltage		Primary-Secondary:3.0KVac; ≤10mA .Primary-PG:1.5KVac; ≤10mA. Secondary-PG:0.5KVDC;≤10mA.
	Isolation Resistance		≥100M ohms
	EMI Conduction&Radiation		/
	Harmonic Current		/
	EMS Immunity		Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,light industry level,criteriaA
OTHERS	MTBF (MIL-HDBK-217F)		More than 100,000Hrs (25℃, Full load)
	Dimension (LWH)		199×99×50mm
	Packing		12pcs/carton GW:9.2KGS
	Cooling method		Cooling by free air convection
NOTE	1. All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature. 2. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. 3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives. 4. If you need fixture A or fixture B for install purpose,please contact our sales.